Non IS Lasers

DLX-635 dual beam aluminium smelter anode alignment laser system.

These systems emit two beams separated by the distance required to set the anode depth so that when the anode is replaced into the smelting line, the current does not alter significantly from the old anode settings.

A top "DOT" is produced above a Solid Laser Line. The standard distance between these beams, can be specified to be 12, 16 or 18mm. Other distances are available on request. The distance between the beams is used to determine the correct depth for the replacemnt anode.

Each unit consists of
	Lower Section containing 4 by C Sized Batteries
	Top Section containg the Laser and Optical Units, producing the two laser beams
		The Push Button is located on the top of the Laser Unit.
		Pressing this nutton causes the beams to be activated for approximtaely 10 seconds.
		This allows the operators hands to be free, and removes the need to turn the Laser Unit Off.
		Been in Service by a major Customer for over 10 Years

These units are Manufactured in Australia

Please phone or email us for more information.

sales@stottind.com.au

Ph 02 49 668020

FX 02 49 668020